高瓦斯矿井U型通风工作面瓦斯治理技术

针对李雅庄煤矿U型通风工作面上隅角及回风流瓦斯浓度高、瓦斯治理难度大的问题，根据工作面瓦斯来源及在采空区三带的运移储存规律，李雅庄煤矿开展了本煤层抽采工艺优化和裂隙带抽采技术研究。对本煤层钻孔封孔深度、联孔工艺、管路连接方式等进行优化，钻孔抽采浓度由抽采4个月后降低到9%提高到抽采10个月后维持在19%；通过调整裂隙带钻孔布置方式、优化钻孔布孔层位、采取下筛管护孔等技术措施，裂隙带钻场最高瓦斯抽采纯流量达13.6 m³/min，平均瓦斯抽采纯流量达8 m³/min，2个钻场联合抽采瓦斯纯流量在13 m³/min以上；取消了瓦斯措施巷、井下移动泵和上隅角风帘，上隅角和回风流平均瓦斯浓度分别控制在0.5%和0.4%以下，对高瓦斯矿井U型通风工作面瓦斯治理有借鉴意义。     

培养原料种类的减少对人工窖泥发酵剂菌群结构的影响

为实现人工窖泥发酵剂（APMSC）的品质控制，从前期开发的发酵剂配方中分别取出老熟窖泥、曲药、酒糟和黄水初步形成4个简化配方，采用扩增子测序和色谱技术比较了各配方发酵剂的微生物群落结构及香味物质含量差异。结果显示，各配方发酵剂样品中共检测到70个微生物操作分类单元（OTU），其中71.43%为各组样品共有，未检测到独有OTU。各配方样品的优势微生物均存在于其余分组中，仅物种相对丰度有所差异。根据酿酒有益微生物的丰度高低，选择了一种简化配方（无老熟窖泥作原料）发酵剂养护窖池，使酿造白酒的主体香味物质含量得到显著提高。结果表明，即使缺失了某一种培养原料，人工窖泥发酵剂的功能微生物物种也可能由其他原料补充，而原料种类的减少是实现发酵剂品质控制的主要途径。     

基于改进人工蜂群算法的多目标绿色柔性作业车间调度研究

针对多目标绿色柔性作业车间调度问题（MGFJSP）的特点，提出从碳排放量、噪声和废弃物这3个指标来综合评定环境污染程度，建立了以最小化最大完成时间和环境污染程度为优化目标的MGFJSP模型，并提出了一种改进的人工蜂群算法来求解该模型。算法的具体改进包括：设计了一种三维向量的编码和对应解码方案，在跟随蜂搜索阶段引入一种有效的动态邻域搜索操作来提高算法的局部搜索能力，在侦查蜂阶段提出产生新食物源的策略用于增加种群的多样性。最后进行了实验研究与算法对比，以验证所建模型和所提算法的有效性。     

朝凯煤矿露天台阶爆破装药结构优化应用研究

本文以神达朝凯煤矿正在开采的台阶为工程背景,针对该矿在台阶爆破过程中存在着大块率高、根底多的现象,通过改变装药结构的方式对爆破参数进行优化。实践证明,优化后大块率和根底问题的治理效果明显。     

单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。     

利用调度优化模型研究原油调合方案的可行性

针对某沿海炼油企业拟投用原油调合系统以稳定混炼原油的性质,设计方案要求将部分码头罐的操作模式由混储改为单储的情况,采用约束规划与数学规划复合建模,实现了码头至厂区大容积长输线模拟,建立了该企业的原油调度优化模型并研究了设计方案的可行性。针对240h调度周期、10种可加工原油、3艘到港油轮的复杂工况进行了优化计算。结果表明:该设计方案具备可行性,且油轮仍可实现到港即卸油,蒸馏装置混炼油种也可长时间保持稳定;模型的优化计算时间较短(小于15min),且对长输线收付及存油情况模拟准确,复合建模方法满足工业应用要求。     

Optimal design of Raman fibre amplifier based on terminal value optimization strategy and shuffled frog leaping algorithm

This paper introduces an evolutionary algorithm, Shuffled Frog Leaping Algorithm (SFLA), to solve the optimization problem in designing the multi-pumped Raman Fibre Amplifier (RFA). SFLA is a powerful optimizer tool because of its efficient mathematical expressions and global search capability. We utilize SFLA to determine the optimal pump wavelengths and pump powers by minimizing the gain ripple of RFA. To accelerate calculations, a terminal value optimization strategy (TVOS) is incorporated into the evolution of SFLA. This proposed strategy takes the terminal power values of pumps as the decision variables in optimization. Then, the optimal original power values of the pumps are obtained by solving the Power Coupled Equations once, without using the traditional method of repetitive guesses.The combination of SFLA and TVOS enhances the efficiency of optimization and accelerates calculation, while satisfying the design requirements of RFA.The simulation results show that nearly 65% of computational time has been saved compared with the traditional average power analysis. The 4-pumped C+L band of backward multi-pumped RFA with the average net gain of 0 dB, 1 dB and 2 dB are designed individually, where the gain ripple is less than 0.64 dB. The combination of SFLA and TVOS enhance the optimization efficiency and improve the performance of RFA with good gain profile.     

攀西钒钛磁铁矿尾矿制备储水泡沫陶瓷的研究

以攀西钒钛磁铁尾矿和废玻璃为主要原料通过高温烧结法制备储水泡沫陶瓷，研究原料配比和发泡剂（SiC）添加量对材料性能的影响。结果表明:随着钒钛磁铁矿尾矿含量的增加，材料的体积密度及抗压强度逐渐增大，平均气孔孔径逐渐减小；当尾矿添加量为50 wt%，材料的体积吸水率出现极值。当SiC添加量为0.3 wt%，材料内部气孔分布均匀，平均孔径约为2.93 mm。最终以50.0 wt%的钒钛磁铁矿尾矿和50.0 wt%的废玻璃为原料，外加3.0 wt%的石英，0.3 wt%的SiC，3.0 wt%的Na3PO4，在1040℃下制得性能最优的储水泡沫陶瓷，材料的体积密度为0.26 g/cm-3、体积吸水率为56.5%和抗压强度为0.68 MPa。采用SEM、XRD等检测手段研究材料的微观形貌及物相组成，结果表明储水泡沫陶瓷内部由三维立体结构组成，有利于储存水分；材料主要物相包括硅灰石、长石、透辉石和钛铁矿。      

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

基于背压和最佳阀位控制的滑压曲线实时优化及应用

针对目前凝汽器背压对滑压值的修正无普适算式可供遵循的问题，通过作图法推理获得了滑压设定值与凝汽器背压及机组负荷之间的二元函数表达式；利用流量变工况计算方法解决最佳综合阀位的确定问题，在满足机组日常运行需求的条件下达到汽轮机高压调阀节流损失最小化；将提出的基于凝汽器背压和机组负荷的二元函数滑压实时优化和基于流量变工况计算的最佳综合阀位控制滑压实时优化方法相结合，将凝汽器背压对滑压值的修正作为粗调，将最佳综合阀位控制对滑压值的修正作为细调，共同实现对滑压设定值的实时调整。在某660 MW超临界机组上的应用表明，该方法能够节约供电煤耗约1.12 g/(kW·h）。